PBC/6X & Mesa Mark V:35

[Jerome F]

Newbie question here...

Can the Mastermind PBC/6X control my Mesa Mark V:35 directly via one of the two interface cables RJM sells, or do I need to use something like the Mini Amp Gizmo?

 

[rjmmusic]

As long as you can live with switching only channel and eq, or channel and solo, then you don't need a Mini Amp Gizmo. We don't sell this specific cable, but you could get one made by Best-tronics (www.btpa.com). The cables we sell either have an 8-pin connector (for a Mini Amp Gizmo) or two 1/4-inch connectors (for the PBC/10, Switch Gizmo or other device with two switching jacks). The PBC/6X has a single switch jack, so it needs a cable with a single 1/4-inch TRS, and can switch two functions.

If you really need to switch all three functions, then you could add a Mini Amp Gizmo and the Mark V:35 interface cable and control it with the PBC/6X.

 

[Jerome F]

Thanks for the quick response. I'm going to have to ponder further.

 

[dmoore0565]

I’m assuming the mesa boogie midi matrix amp controller would support integration with the pbc.

 

[rjmmusic]

I’m assuming the mesa boogie midi matrix amp controller would support integration with the pbc.

Yes, they should work together.