cuterigs
Active Member
Hello!
I have a setup here I’m working on. Basically, the Suhr Eclipse (distortion/overdrive) is a two channel pedal with a TRS remote switching function. This pedal will be after the PBC6X and will be using the Function switches to toggle channels/bypass.
Tip = Red Channel
Ring = Blue Channel
Tip + Ring = Red Channel
Both off = bypass
Basically, I need a preset to call up the blue channel by default, so I set Function Sw 2 ON in the preset for Ring.
The preset calls up a local page. I need a button that toggles bypass (tip and ring OFF) and a button that switches between blue and red (tip or ring). I have this setup but the hang up is I don’t know how to make it so toggling between bypass and ON goes to whatever the last channel was, blue or red. It seems I have to specify what channel it goes to when turning it back on. Is what I’m looking for possible on the PBC6X?
Thanks all!
jg
I have a setup here I’m working on. Basically, the Suhr Eclipse (distortion/overdrive) is a two channel pedal with a TRS remote switching function. This pedal will be after the PBC6X and will be using the Function switches to toggle channels/bypass.
Tip = Red Channel
Ring = Blue Channel
Tip + Ring = Red Channel
Both off = bypass
Basically, I need a preset to call up the blue channel by default, so I set Function Sw 2 ON in the preset for Ring.
The preset calls up a local page. I need a button that toggles bypass (tip and ring OFF) and a button that switches between blue and red (tip or ring). I have this setup but the hang up is I don’t know how to make it so toggling between bypass and ON goes to whatever the last channel was, blue or red. It seems I have to specify what channel it goes to when turning it back on. Is what I’m looking for possible on the PBC6X?
Thanks all!
jg