ctreitzell
Member
I just rewired my rack and have a power supply which has two 9V AC zones. The actual voltage is a bit higher.
Zone One 9V AC is actually 9.89V-10.25V
and Zone Two 9V AC is 9.19-9.45
I do have a spare variable DC zone which could be set to exactly 12.00V DC if Zones One and Two are too high.
Also, to be clear I am phantom powering a Morningstar MC-8 via RG-16 MIDI In.
Will the RG-16 be fine on Zone One? I'd like to use Zone Two for my WH-1.
My RG-16 is circa 2011; red lights/ all mono.
Zone One 9V AC is actually 9.89V-10.25V
and Zone Two 9V AC is 9.19-9.45
I do have a spare variable DC zone which could be set to exactly 12.00V DC if Zones One and Two are too high.
Also, to be clear I am phantom powering a Morningstar MC-8 via RG-16 MIDI In.
Will the RG-16 be fine on Zone One? I'd like to use Zone Two for my WH-1.
My RG-16 is circa 2011; red lights/ all mono.