EVHGuy1111
Well-Known Member
I'm wondering if anyone can give me advice. I've never made a pedal so I'd have a lot of research to do... and there are custom pedal fabricators out there I can approach (which I'm willing to do)... I'd just like an idea if what I'm looking to do is possible with the MMLT and MEGX before approaching a fabricator for a custom stompbox.
I run a MEGX and MMLT on my rig. I LOVE the RJM setup and versatility!
One thing I'd like to do is switch the routing of my CryBaby Jr Wah for certain presets. Particularly, have a preset that routs the Input and Output of the CryBaby Jr backwards to achive the David Gilmour "seagull" sound (where he used a Wah plugged in backwards with delay and reverb on the effect).
My idea is a box that has a MIDI input to receive MIDI commands. So the box would be on the backline with my other pedals, The CryBaby Jr would be plugged into the box, the box would have 1/4 cable going out to the MEGX and a MIDI input. The idea is the box would be set up as a generic MIDI device, when a particular preset is triggered by the MMLT, the preset would also send a MIDI command to the box and it would automatically rerout the CryBaby "backwards" for that preset... then all other presets would send a different MIDI command to set the CryBaby routing "correct".
Is this idea possible with the RJM hardware? If so, any info or ideas I'd need to bring to the box fabricator?
Thanks!
I run a MEGX and MMLT on my rig. I LOVE the RJM setup and versatility!
One thing I'd like to do is switch the routing of my CryBaby Jr Wah for certain presets. Particularly, have a preset that routs the Input and Output of the CryBaby Jr backwards to achive the David Gilmour "seagull" sound (where he used a Wah plugged in backwards with delay and reverb on the effect).
My idea is a box that has a MIDI input to receive MIDI commands. So the box would be on the backline with my other pedals, The CryBaby Jr would be plugged into the box, the box would have 1/4 cable going out to the MEGX and a MIDI input. The idea is the box would be set up as a generic MIDI device, when a particular preset is triggered by the MMLT, the preset would also send a MIDI command to the box and it would automatically rerout the CryBaby "backwards" for that preset... then all other presets would send a different MIDI command to set the CryBaby routing "correct".
Is this idea possible with the RJM hardware? If so, any info or ideas I'd need to bring to the box fabricator?
Thanks!