setting up rg16 with Liquid foot pro and markv

[sanuck]

Can anybody help me setup these devices.to control my amp and activate 3 pedals.I don't see cc#'s for amp functions.thanks for any help

 

[MartinCliffe]

From p13 of the PDF manual, Function Switches 1-8 correspond to CC#s 88-95.

 

[sanuck]

So would cc88 will be ch 2

 

[MartinCliffe]

CC#88 will be whatever function button 1 on the front of the RG16 activates - usually channel 1, but depends on your amp and if you're using a dedicated cable or the generic 1/4" jack cable.

 

[sanuck]

i setup my liquid foot pro for midi ch 3 and call cc# 80 for audio loop and data 000 but it doesnt call the loop 1?what could be happening in this setup?

 

[MartinCliffe]

Data 000 is loop OFF. You need to give it a value bigger than 64 to turn it on. 127 is good to be safe.

 

[sanuck]

had CC# 80 on for preset 1 then cc#81 for preset 2.preset 2 turns loop 2 on same as loop 1.same as function 1 and 2 is on.what could be wrong that func sw is on too and how come 1 and 2 is on too.i want have preset 2 only for loop 2.thanks for any response