Holy Diver
Member
Hi all,
I am currently assembling a rack and have a question about how it power it.
At the moment it has the following:
Rack Decimator - 9V AC
RJM Rg16 - 9V AC or 12 V DC
G-Major
MXR 10-band EQ - 18V DC
Maxon OD808 - 9V DC
The G-major has a standard IEC connection. The rest have external PSUs.
Is there a product (preferably that only takes a single rack-space) that will allow me to power each of these without needing their individual PSUs?
I was looking at a Furman M-10X E, but it appears that I will need the PSUs for this to work.
Also I will be using 230V....
I'd appreciate any advice!
Thanks.
I am currently assembling a rack and have a question about how it power it.
At the moment it has the following:
Rack Decimator - 9V AC
RJM Rg16 - 9V AC or 12 V DC
G-Major
MXR 10-band EQ - 18V DC
Maxon OD808 - 9V DC
The G-major has a standard IEC connection. The rest have external PSUs.
Is there a product (preferably that only takes a single rack-space) that will allow me to power each of these without needing their individual PSUs?
I was looking at a Furman M-10X E, but it appears that I will need the PSUs for this to work.
Also I will be using 230V....
I'd appreciate any advice!
Thanks.