Stupid Mastermind GT/16 Power question.

[ESPImperium]

Can i power the Mastermind GT/16 from a Voodoo Labs Pedal Power AC using two of the 9V power outputs?

The manual says 12V DC @ 1000mA, will 9V AC @ 1200MA or 1800mA be enough.

I want to have 5 floor pedals as well, a EHX Pitchfork (30mA), EHX Micro Pog (25mA), Dunlop Zakk Wah (900uA), Boss TU-2 (55mA) and TC Electronics Mini Spark Boost (40mA).

Can that all be powered from the two 9V outs as well as long as either power out does not exceed 100mA if I'm reading the manual correct?

Just want to make sure before i order my GT/16 in the next coupe to three weeks. Ive got my Phantom box and my 7 pin MIDI cable, all i need is the GT/16 and I'm away and fully working with my guitar rig as it is, barring getting it wired up for Audio and getting the delay pedal i need/want.

Thanks.

 

[rjmmusic]

9VAC 1200mA will be fine for a Mastermind GT. The outputs of the GT can supply a maximum of about 110mA total, so you're probably not going to be able to power everything you want from it (but you can probably power most of them).