Switching a Peavey Rockmaster

[Steviebone]

Anyone here have any experience using the PCB10 to switch a Peavey Rockmaster? This is a 3 channel preamp with a two button foot-switch setup. I'm not sure it's wired for a standard two button two channel rig as the third channel (clean) is both switches off.

 

[rjmmusic]

I've never tried it, but it sounds like a standard two button setup. Use a TRS cable from function switch output to the amp's footswitch input. The two function switches should operate exactly like the two switches on the footswitch.