Toggle between Stereo and Mono with paralell and series loops

[Stereodita]

Hi there.

My setup is:
Loop7: Rogerlinn Adrenalinn. Series
Loop8: Eventide H9 . Series ( sometimes in paralell )
Loop9: Eventide H9 . Paralell
Loop10: Strymon Big Sky. Paralell

I would like to ask you what cables I need and how the buttons MONO/STEREO and MONO OUTPUT must be pressed to sound correctly in STEREO.

And if I wanted to sound in MONO: how do I repatch the pedals/cables and how the buttons should be pressed.

I would like my mono sound to be exactly the same as if I used the common TS cable configuration

Thanks in advance and sory my bad english.

 

[rjmmusic]

Here's all the information you'll need:

How do I connect stereo pedals to the Mastermind PBC?

Please note that these instructions are specific to the Mastermind PBC/10. The Mastermind PBC/6X uses a different method for connecting stereo pedals. Loops 7 through 10 are stereo capable on the Mastermind PBC/10. You can use them with mono ...

rjmmusic.freshdesk.com

 

[Stereodita]

Here's all the information you'll need:

How do I connect stereo pedals to the Mastermind PBC?

Please note that these instructions are specific to the Mastermind PBC/10. The Mastermind PBC/6X uses a different method for connecting stereo pedals. Loops 7 through 10 are stereo capable on the Mastermind PBC/10. You can use them with mono ...

rjmmusic.freshdesk.com

Thanks for your answer.

Really I want to know how can I toogle between stereo and mono. If I want to back to mono setup, what cables do I have to disconnect in my pedals Strymon and H9?? Do I have to disconnect the left input of all my pedals? and how should I have the button Mono Output and Mono -> Stereo (out)

thanks again.

 

[rjmmusic]

Really, all you should need to do is just use 1 output from the PBC when you're running mono and leave the other unconnected. You could add something external to sum the left and right sides of the signal, but that has its own problems, most notably with modulation effects.

Here's a video our friend Mason did about the topic:
DO NOT Sum Your Stereo Rig to Mono! (do this instead)