Search results

  1. S

    RG-16 Buzz from Rack Unit on Top of it?

    Update: I think the locus of the buzz is somehow related to the Input jack on the front of the RG. I need to finesse it up and down to find the right spot for the hum to go away. I've tried every premium cable I own (high end ranges of analysis plus, evidence, etc.) with same issue. I'm just...
  2. S

    RG-16 Buzz from Rack Unit on Top of it?

    I'm uninitiated into hum/buzz troubleshooting. Everything was working great with my RG-16 until I put an Axe-Fx II on top of it in my rack (didn't screw mount it in place). I tested every cable until I found that the Axe-Fx physically sitting on top of the RG-16 was the culprit. I also put...
  3. S

    Soldano Hot Rod 25 & Interface Cable

    Works!
  4. S

    Soldano Hot Rod 25 & Interface Cable

    I saw on the interface compatibility page that the AC-1QTRS works for the Soldano Hot Rot 50, so I'm assuming it should just as well work for the Hot Rod 25. Is my assumption sound? Thanks, SR
  5. S

    RG-16 and Lack of FX Loop

    Yep got it. I actually own the RG-16 but am reconfiguring my rig, and I'm paranoid about doing something wrong so I thought I'd check with the expert! And my Mastermind is on it's way... Thanks again Ron!
  6. S

    RG-16 and Lack of FX Loop

    Super, thank you!
  7. S

    RG-16 and Lack of FX Loop

    Thanks! Quick follow-up if you don't mind: Can I sacrifice 3 pedals to regain amp channel switching functionality via the RG-16 for my 3 channel Dual Rectifier (I already own the special cable). Thanks agsin
  8. S

    RG-16 and Lack of FX Loop

    Many apologies if what follows is an obtuse question. Do you need an effects loop on your amp(s) for the RG-16 to function properly with the following setup? --> Amp 1: Mesa Boogie 3 Channel Dual Rectifier (has FX loop) Amp 2: Divided by 13 JRT 9/15 (does not have fx loop) I only have...
Back
Top