rjmmusic's latest activity

  • rjmmusic
    rjmmusic replied to the thread RJM GT22 - Axe3 skipping preset.
    I see you've tried Direct Send, but now try to turn on both Direct Send and Send Redundant PC. I can't test this right now, but from...
  • rjmmusic
    rjmmusic replied to the thread RJM GT22 - Axe3 skipping preset.
    If you're trying to access a preset above #128, I would expect that result. I thought that the problem was that you were trying to...
  • rjmmusic
    rjmmusic replied to the thread PBC 10 issue with presets.
    Are you using the latest firmware? I've loaded up your settings, and when I switch to page 4, pressing the three buttons turns on the...
  • rjmmusic
    rjmmusic replied to the thread PBC 10 issue with presets.
    It's hard to say without seeing your settings. If you send me a copy of your settings file, and a detailed description of the actions...
  • rjmmusic
    rjmmusic replied to the thread RJM GT22 - Axe3 skipping preset.
    Here's something to try - add an IA button that has a CC Toggle #0 off:None on:0 action that sends to the Axe-Fx. Make sure that all...
  • rjmmusic
    rjmmusic replied to the thread Tuners for Mastermind GT.
    Yes, you can do that.
  • rjmmusic
    rjmmusic replied to the thread Local Page Problems.
    If you'd like the preset to automatically switch to the local page when the preset is loaded, you have to turn on Auto Page Select in...
  • rjmmusic
    rjmmusic replied to the thread PBC 6X Split Mono Question.
    There shouldn't be any problem with that, it's definitely a configuration I've tested. Do you have the latest firmware? We did have an...
  • rjmmusic
    rjmmusic replied to the thread Timeout receiving data.
    I could be a bug certainly, but it's seems more of an incompatibility, because only two people are seeing this. Since you have an LT...
  • rjmmusic
    rjmmusic replied to the thread Tuners for Mastermind GT.
    It's a built in function, no additional hardware required. The only thing you need to insure is that there's a direct MIDI connection...
  • rjmmusic
    rjmmusic replied to the thread New MEGs?.
    The best connection is to put the MEG in the PBC/10's insert loop where the amp's effect loop used to be, then one of the MEGX's loops...
  • rjmmusic
    rjmmusic replied to the thread New MEGs?.
    Yes, you can control them separately, but only the lower numbered loop can be controlled from the front panel. The other side of the...
  • rjmmusic
    rjmmusic replied to the thread Timeout receiving data.
    Just to be certain - both the editor and firmware are at version 4.6.1?
  • rjmmusic
    The PBC10 is shipped with a 9VDC 1000mA wall wart style power supply.
  • rjmmusic
    rjmmusic replied to the thread Tuners for Mastermind GT.
    There are no dedicated tuners I know of that have MIDI support. The 3rd party devices that we know of that can send tuner data over MIDI...
Top