Axe Fx III + GT22 = perfection

Megahertzz

Active Member
Just finished my Axe Fx III rig. Gotta say I'm pretty satisfied

Gear:

SKB 6u rolling rack:
  • Furman PL-PRO DMC E power conditioner
  • Matrix GT1000FX power amp into a Matrix CFR12 monitor
  • Shure QLXD4 wireless
  • Axe FX III
Pedaltrain Pro pedalboard:
  • Mission Engineering EP1-RJM x2
  • Mastermind GT22
Luckily I didn't have to remove the rubber feet on the GT or the expression pedals, they fit perfectly in the gaps of the board.


zVQ4UI8I.jpeg

In the back of the rack i have an RJM phantom power box, that provides midi signals and power to the GT22 through a 6 pin XLR cable. Everything is powered from the power conditioner, so that AXE FX, power amp, wireless and GT22 turns on by the press of only one button.

qVgIgVW6.jpeg


As for programming the GT22, i used the file user iaresee posted a while ago, and modified it quite a bit. The page setup is pretty similar, but tap tempo and tuner are combined in one button, and switching presets are done a bit differently. I want to have the tuner engage when the heel of exp. pedal 1 is down, and the toe switch (ext. ctrl. 3) is off, but i don't know how to make it happen. If anyone can help, I would be very grateful. Here are some screenshots and the file for those interested:



New Phototastic Collage.jpg
 
Top