I'm a fairly new pbc 6x user. I have a JHS Kilt which has a remote jack to flip to a higher gain setting. My current set up is the Kilt is in loop 4 for then I set up button 6 (L6) to control function 1. This set up works fine, but was wondering if I could do it differently and have each one button be loop on and function 1 on, and the other button just be loop on. Almost like having two separate pedals - click L6 button for a high gain pedal (Loop with func 1 on), click Loop 4 (Loop with func 1 off).
I tried setting the L6 button to control the Kilt loop (loop 4) AND the function switch 1. This kind of works but not independently enough with this functionality. I'm thinking I need some sort of group.
On the loops page...
Here's the functionality I'd like
All loops off..
1. Click L6 - Turns on Loop 4 and flips on Func 1 - L6 led on
2. Click L3 - Leaves loop 4 on, turns func 1 off - L3 led on, L6 led off (currently it turns off Loop 4, L3 led off and func 1 on, L6 led still on)
3. Click L6 - Leaves loop 4 on, turns func 1 on - L6 led on, L3 led off
4. Click L6 - Turns loops 4 off, turns func 1 off - L6 led off
All loops off..
1. Click L3 - Turns on loop 4 - L3 led on
2. Click L6 - Leaves loop 4 on, turns func 1 on - L6 led on, L3 led off (currently leaves loop 4 and L3 led's on, and turns on func 1 and L6 led)
3. Click L3 - Leaves loop 4 on, turns func 1 off - L3 led on, L6 led off
4. Click L3 - turns loop 4 off, func 1 remains off - L3 led off
I'm hoping that makes sense.
I tried setting the L6 button to control the Kilt loop (loop 4) AND the function switch 1. This kind of works but not independently enough with this functionality. I'm thinking I need some sort of group.
On the loops page...
Here's the functionality I'd like
All loops off..
1. Click L6 - Turns on Loop 4 and flips on Func 1 - L6 led on
2. Click L3 - Leaves loop 4 on, turns func 1 off - L3 led on, L6 led off (currently it turns off Loop 4, L3 led off and func 1 on, L6 led still on)
3. Click L6 - Leaves loop 4 on, turns func 1 on - L6 led on, L3 led off
4. Click L6 - Turns loops 4 off, turns func 1 off - L6 led off
All loops off..
1. Click L3 - Turns on loop 4 - L3 led on
2. Click L6 - Leaves loop 4 on, turns func 1 on - L6 led on, L3 led off (currently leaves loop 4 and L3 led's on, and turns on func 1 and L6 led)
3. Click L3 - Leaves loop 4 on, turns func 1 off - L3 led on, L6 led off
4. Click L3 - turns loop 4 off, func 1 remains off - L3 led off
I'm hoping that makes sense.