Soren Kelly
Well-Known Member
I love my Board gt22, then this happend
I was in my little studio went in for dinner when i came out my board wasn´t on weird i thought
could not get it allive, thought that maybe it was the usb to PC that did it , but no wasn´t that...
Next step check another PSU and it kind of came alive but got stuck on bootloading,
tryed my 6 pin cable midi, power comes from the psu sitting bside the axe3.
did not help so i thought that i would take it apart to see if ribboncable had come off.. Not that either...
while i had it apart i stuck in the 6 pin again and it booted up but screens were all weird sign/symbols
i tryed a reboot and it came back alive, whooopiii testet all functions everything was working perfectly.
I put it back together again but after 5 min id died again....
i did try to redo all the steps nopthing helps if i reverse +/- i can get the main screen to light but only 30 sec
any help @Ron @rjmmusic
Cheers Søren Kelly from Denmark
I was in my little studio went in for dinner when i came out my board wasn´t on weird i thought
could not get it allive, thought that maybe it was the usb to PC that did it , but no wasn´t that...
Next step check another PSU and it kind of came alive but got stuck on bootloading,
tryed my 6 pin cable midi, power comes from the psu sitting bside the axe3.
did not help so i thought that i would take it apart to see if ribboncable had come off.. Not that either...
while i had it apart i stuck in the 6 pin again and it booted up but screens were all weird sign/symbols
i tryed a reboot and it came back alive, whooopiii testet all functions everything was working perfectly.
I put it back together again but after 5 min id died again....
i did try to redo all the steps nopthing helps if i reverse +/- i can get the main screen to light but only 30 sec
any help @Ron @rjmmusic
Cheers Søren Kelly from Denmark