toasterdude
Well-Known Member
Hey. The last two nights I have been in my home studio, redoing programming on my rig and experimenting with the MMGT. Gotta say, this thing is the Rolls Royce of Midi Controllers.
Ron was nice enough to explain to me how to do CC link on the GT. I think I had it set up right and all was working.
I added a GT as a device. Set midi receive to 16. Set all my "sub preset" local page buttons to have the CC link command first. I used CCs 101-116 for the 16 buttons. Did not test all but set up a maschine project where there were 5 scenes. Scene 1 called up sub preset 1, scene 2 subpreset 2 etc up to 5 or 6 scenes. Can't remember. I was VERY happy. Made the maschine prgramming WAY easier.
Then the wheels fell off. lol. I added another scene at beginning of maschine project to set the GT preset to 03. It worked! But. . . .then the sub presets no longer changed with the corresponding Maschine scenes?
It was late and I went in circles a bit. At one point I discovered that in MMGT edit the GT was set to receive on channel 16 but on the GT itself it was channel 2? Made no sense as how were the sub preset buttons responding to Maschine if Maschine was sending on 16 and the GT was on 2?
I am not clear as to what the options on the MMGT device settings panel should be set to? They seem geared towards devices that receive commands from GT not GT receiving from Maschine or external source?
For now I have it set:
Midi Channel 16
PC Offset 0
MSB:LSB
Flat numbering off
Midi Port - remote in?
Max PC 0
# of presets 384
all six checkboxes below off. I tried most of the combinations but none worked properly. I could either get the CC link to work or PC to work. Not both? By the end, I could not get the CC link to function again.
What am I doing wrong?
Ron was nice enough to explain to me how to do CC link on the GT. I think I had it set up right and all was working.
I added a GT as a device. Set midi receive to 16. Set all my "sub preset" local page buttons to have the CC link command first. I used CCs 101-116 for the 16 buttons. Did not test all but set up a maschine project where there were 5 scenes. Scene 1 called up sub preset 1, scene 2 subpreset 2 etc up to 5 or 6 scenes. Can't remember. I was VERY happy. Made the maschine prgramming WAY easier.
Then the wheels fell off. lol. I added another scene at beginning of maschine project to set the GT preset to 03. It worked! But. . . .then the sub presets no longer changed with the corresponding Maschine scenes?
It was late and I went in circles a bit. At one point I discovered that in MMGT edit the GT was set to receive on channel 16 but on the GT itself it was channel 2? Made no sense as how were the sub preset buttons responding to Maschine if Maschine was sending on 16 and the GT was on 2?
I am not clear as to what the options on the MMGT device settings panel should be set to? They seem geared towards devices that receive commands from GT not GT receiving from Maschine or external source?
For now I have it set:
Midi Channel 16
PC Offset 0
MSB:LSB
Flat numbering off
Midi Port - remote in?
Max PC 0
# of presets 384
all six checkboxes below off. I tried most of the combinations but none worked properly. I could either get the CC link to work or PC to work. Not both? By the end, I could not get the CC link to function again.
What am I doing wrong?