This is a brand new venture for me and feel a little overwhelmed. Always been a pedal guy but not experienced in programming a switcher etc. I wanted a loop switcher to make it easy during songs in my set to turn on multiple pedals at once and after a ton of research I bought the PBC/6X for its size and known ease of use. . Just finished the build which took a few weeks to finally get it all wired. Everything powers up. This is my Routing:
Shure GLXD16 Wireless -> Xotic Wah -> PBC/6X
Loops:
1. Fulltone 2B Boost
2. Drybell Unit 67
3. Skreddy Lunar Module
4. Fulltone CDV MKII Dejavibe
5. Boss PS-6 Harmonizer
6. Mooer Lady Flanger
7. (IN) Keeley 30MS
Mad Prof Deep Blue Delay and Neunaber Immerse MK II are direct to Amp FX Loop.
Read the manual. Want to program presets now .
I don't need many standard presets. Clean, Rock Rhythm, Lead Boost. Most of my presets I want to engage the harmonizer, flanger, vibe, Doubler etc
Some Questions:
Is there a no brainer demo video or easy way to do this?
Should I bother trying to put a setlist together from the start?
Is there a way if I wanted to setup the PBC/6X to just turn pedals on/and off in realtime without a preset?
Do I have to program my amp channel switcher into the preset to dictate if its clean or OD?
I'm sure more questions will popup.
Thank in advance for any help and your patience.
Shure GLXD16 Wireless -> Xotic Wah -> PBC/6X
Loops:
1. Fulltone 2B Boost
2. Drybell Unit 67
3. Skreddy Lunar Module
4. Fulltone CDV MKII Dejavibe
5. Boss PS-6 Harmonizer
6. Mooer Lady Flanger
7. (IN) Keeley 30MS
Mad Prof Deep Blue Delay and Neunaber Immerse MK II are direct to Amp FX Loop.
Read the manual. Want to program presets now .
I don't need many standard presets. Clean, Rock Rhythm, Lead Boost. Most of my presets I want to engage the harmonizer, flanger, vibe, Doubler etc
Some Questions:
Is there a no brainer demo video or easy way to do this?
Should I bother trying to put a setlist together from the start?
Is there a way if I wanted to setup the PBC/6X to just turn pedals on/and off in realtime without a preset?
Do I have to program my amp channel switcher into the preset to dictate if its clean or OD?
I'm sure more questions will popup.
Thank in advance for any help and your patience.
