@HereToday
Very basic info below, but maybe will still help.
So, when you setup your GT22, holding down the two small buttons just below the main LCD screen on the GT22, and first selecting "Edit Device" button, and assuming this is the only device you have, choosing 1: Axe-FX button (upper left). Now when you choose the "Get Presets Names" button, now you are presented with five choices (other than Start or Done). If you choose the "Get Scenes" button so it is ON, and choose the "Create Songs" button so it OFF, and set the "Start Preset" to 1, and the "End Preset" to 10, you can choose the "Start" button and it should bring your preset info from your AF3 (preset 1 - preset 10), into your GT22, along with the scenes for those presets. You can test to see if that worked, by clicking the "Done" button until actual preset info is shown on your GT22, with the same preset on your AF3.
This is how I choose to run my GT22, but you can expand beyond this, if you desire. It just might be good to know it is working as intended at this level.
Hope this isn't too redundant or rudimentary, but starting at square one can sometimes help.
Cheers,
Lee