travis_38
Active Member
I am running a Line6 M5 in Loop 8, Timeline in Loop 9, and BigSky in Loop 10.
I have a Ring Disconnect Cable going from the PBC to the M5, then back to the PBC with an insert cable. Both the Timeline and BigSky are using Insert Cables for both in/outs.
When I engage Loop 8 (M5) I get no signal.
When I engage the Timeline and/or BigSky (both in series) I get stereo delay and reverb (as expected)*
When I engage the Timeline (parallel) and BigSky (series) I get stereo delay but no reverb*
When I engage the Timeline (parallel) and BigSky (parallel) I get stereo delay and reverb blended parallel (as expected)*
When either Timeline or BigSky are set to parallel and bypassed, I get no sound at all*
*These results also happen when Loop 8 send/return are completely disconnected
Please help!
I have a Ring Disconnect Cable going from the PBC to the M5, then back to the PBC with an insert cable. Both the Timeline and BigSky are using Insert Cables for both in/outs.
When I engage Loop 8 (M5) I get no signal.
When I engage the Timeline and/or BigSky (both in series) I get stereo delay and reverb (as expected)*
When I engage the Timeline (parallel) and BigSky (series) I get stereo delay but no reverb*
When I engage the Timeline (parallel) and BigSky (parallel) I get stereo delay and reverb blended parallel (as expected)*
When either Timeline or BigSky are set to parallel and bypassed, I get no sound at all*
*These results also happen when Loop 8 send/return are completely disconnected
Please help!