So I’ve got 3 pages set up on my pbc. First one is a preset page, second is an “instant” page, and third Is a loops page. On my instant page I have buttons set up for tap tempo, instant access to my Trem and pog, an “ambient” preset, but the one I can’t figure out is just a simple bypass on/off for my Strymon dig.
I have audio loop 5 wired with a mono out to a DD-20 -> DIG ->stereo return to the PBC. So I have a delay loop with both delays, but I was planning to be able to turn the Dig on and off via MIDI and leave my DD-20 on. My problem is the CC will turn the DIG on, but not off. I have a dedicated switch on my instant page set up as an IA switch to send midi CC #102 off value 0 and on value 127. If I use the switch on the pedal to bypass the Dig then the PBC will turn it on, but it will not turn it back off with a second button push.
Has anyone else had an issue with bypassing the V2 Strymon stuff via MIDI or am I missing something silly. I’m not a huge MIDI user by any stretch so it could absolutely be user error.
Also, not sure why it would matter, but here is the board in question.
I have audio loop 5 wired with a mono out to a DD-20 -> DIG ->stereo return to the PBC. So I have a delay loop with both delays, but I was planning to be able to turn the Dig on and off via MIDI and leave my DD-20 on. My problem is the CC will turn the DIG on, but not off. I have a dedicated switch on my instant page set up as an IA switch to send midi CC #102 off value 0 and on value 127. If I use the switch on the pedal to bypass the Dig then the PBC will turn it on, but it will not turn it back off with a second button push.
Has anyone else had an issue with bypassing the V2 Strymon stuff via MIDI or am I missing something silly. I’m not a huge MIDI user by any stretch so it could absolutely be user error.
Also, not sure why it would matter, but here is the board in question.