Ragincajun1919
Member
Good afternoon,
I just purchased a RG-16 and Ground Control Pro to setup my new rack. I had a GCX in the past but it was long ago and I don't remember at all how I set it up. Anyway, I don't know how to connect a few items and am turning to this forum for assistance.
Amps:
Orange TH100 w/4x12
Orange OR15 w/4x12
FX in loop:
Alesis Microverb III reverb and delay
MXR EQ
Boss EQ
(eventually a Line 6 M5 or Eventide Mod pedal will be added)
FX in Front of amps:
MXR GT OD
MXR Zakk Wylde OD
Dunlop DCR 1SR Custom Shop Rack wah
Ideally, I'd like to be able to use the whole FX setup on either amp. But if not, I'll just focus on the TH100 head for now. Additionally, I'll need to be able to change the channels on the TH100. My biggest problem I am unable to figure out is how to run the Wah controller pedal to the Ground control Pro thru the RG-16.
The idea is to run different EQ pedals because the OD side of the TH100 is lacking in EQ control, so I want to run a few different EQ settings on the individual pedals and same goes for the OD pedals, they would be run one at a time, not together.
Help?
I just purchased a RG-16 and Ground Control Pro to setup my new rack. I had a GCX in the past but it was long ago and I don't remember at all how I set it up. Anyway, I don't know how to connect a few items and am turning to this forum for assistance.
Amps:
Orange TH100 w/4x12
Orange OR15 w/4x12
FX in loop:
Alesis Microverb III reverb and delay
MXR EQ
Boss EQ
(eventually a Line 6 M5 or Eventide Mod pedal will be added)
FX in Front of amps:
MXR GT OD
MXR Zakk Wylde OD
Dunlop DCR 1SR Custom Shop Rack wah
Ideally, I'd like to be able to use the whole FX setup on either amp. But if not, I'll just focus on the TH100 head for now. Additionally, I'll need to be able to change the channels on the TH100. My biggest problem I am unable to figure out is how to run the Wah controller pedal to the Ground control Pro thru the RG-16.
The idea is to run different EQ pedals because the OD side of the TH100 is lacking in EQ control, so I want to run a few different EQ settings on the individual pedals and same goes for the OD pedals, they would be run one at a time, not together.
Help?