Recent content by kingb

Had a recent gig where I couldn't locate the outlet cable (IEC C7 methinks). Turned out it had fallen out and was still in my car. But in a panic I pulled out a backup Trutone 1Spot ... 9v 1700mA ... and everything seemed to work. I don't run anything off the courtesy power outlets and no...

Thanks for the replay. Follow up.. Would something like this be possible with the GT or LT models?

Hi I'm using one one of my buttons to send CC to a looper pedal. I have working as. Click 1 - Start recording Click 2 - Toggles playback Click 3 - Toggles overbub etc.... Then hold function resets/deletes the loop. All is working well and I have the button color set to blue on & off -...

Ok - I feel like a chimp here. I have a "stereo" setup (amp and line out). Turns out what I was hearing was due to the amp and line signals being out of phase. The clean channel on my amp switches phase. This completely explains the behavior (brighter, change in volume, etc). But does raise...

Hello ... I'm trying to troubleshoot and minimize some sonic differences relating to volumes, buffers, and pedal order. Here's the scenario: King of Tone (4jack): yellow side in + loop * and red side in 5 loop Volante in loop 4 PBC 6/X buffer on ** * using the + loop here because the KoT...

Yes, I need glasses. But I have a watch that lets me do "black mode" which inverts the colors on the LCD display so that there's more black than white showing. This is much easier on the eyes, less glare in lower light situations, easier to read, and just looks cooler. Would be nice to have...

Ah!!!! Stereo Out = checked! This did it. Thanks much!

Hi - I'm trying to get the "Input 2" to works as a "Tuner Out". I have "Tuner Out" = On in the main audio settings, have "Buffer 1" = On, and have verified that the preset is using the default values (grey and On) for both. I've also tried multiple cables and tuners - and made sure each work...

Thanks! This is very helpful. I'm going with the alternate preset approach = " I recommend doing something easier to remember like this: preset 1's alternate is 201, preset 2 is 202, etc. ... In your alternate presets, you can turn off PC sending ..." A great bonus here is that when in the...

Would be groovy to have the off states be a dimmed version of the on colors.

Hi - I just got the PBC/6X and loving it so far. I'm starting to get into some deeper editing and would like to toggle different things on different presets with the 2nd press. For example: Preset 1 - 2nd press would toggle on Loops 4 & 6 and send a CC on/off to a certain device. Preset 2...

sort of.. not exactly... I have the stomp set to define the tap tempo / midiclock. Also, there's an action on it to fire the Func switch in a momentary fashion (e.g. analog tap tempo). When I stomp on it both the midi clock AND the Func switch fire off. What doesn't happen is that the midi...

Re: Amp Switching ... something "off" with Func switch? The amp is a Friedman Smallbox - one button footswitch (mono cable). Inverting the second switch - allowed the first to work normally. Took me a few moments to realize that access to this is on the unit's global setup - couldn't find this...

Hi My amp uses a mono cable to switch channels. I've tried a couple of different cables (mono, trs > trs, trs > split)... the odd thing is that for both Func switch outputs, I can only switch my amp if BOTH switches are "on". From looking at the manual I would guess that either "1" or "3"...

Thanks for the quick reply. I've tried both types of cables mono/stereo. But at the moment I'm using a stereo-y cable - and have tried both the tip and ring leads.