Recent content by luca9583

Hi Ron I've got a dual footswitch that i'd like to use with a Midi Solutions Dual Footswitch Controller to do Bank Up or Bank Down on the LT via Midi. I want to free up the LT's external footswitch input for other per preset functions, so doing this with a Midi Solutions box seems like the...

Looks great. I guess it all depends on the order you want things to be (eg chorus before Micropitch) and if you want your dry preamp to be dual mono or not. When bypassed, does the Free The Tone send the mono in to both the left and right outs or just the left out?

Again this all depends on if you want your dry preamp to be dual mono or just mono in one channel. Any rack unit that has mono in only would need to be before any stereo effects otherwise it would mess up the stereo image, and i would run one of those in parallel via a MLM unless it has a proper...

I have a pretty involved Effect Gizmo setup that includes mono and stereo fx pre and post preamp, and two amps running in stereo so here are some ideas. First of all, are you getting any ground loops with the Decimator? From what i can tell in the wiring, you’re using the guitar to track the...

Great to hear. I think the Midi over TRS trend in some recent pedals has a big trade off in that the player then has to get a DIN to TRS box which ends up being pretty expensive compared to just adding a simple Midi cable to the chain.

This sounds fantastic Ron. I especially like the fact that you haven't gone for Midi over TRS. Awesome. I would love to see an analog 3 band Parametric EQ pedal in this format.

It's a stereo system. All the correct Ins and Outs are being used, but actually looking at the rig now, the R output of the MLM isn't going to any amp (it normally does) so perhaps there's a partial short being created there.

Hi Ron I have the MLM mixing a dry preamp output (Marshall JVM) plus stereo out from an Axe FX for parallel post effects. Recently i noticed my dry signal would reduce in volume on some of my patches, but the problem instantly goes away if i unplug the Right signal coming from the Axe. The...

Ignore that..i forgot this was a Bank Up button setting. Feel free to delete the post!

Hi Ron I can't seem to access more than 16 songs per setlist after making much larger setlists on the editor for my GT-10 I'm sure this can be selected but i can't seem to find it

Thanks Ron. Is there a way to make this happen when entering a Song in the GT instead? So for example, if i have 5 songs on the GT and they each have the same clean channel preset, is there a way for the GT to send a different PC to Mainstage simply because that same preset is being selected in...

Hi Ron I have songs in Mainstage each set to be selectable via PC message on a Midi Channel. Mainstage is set up as a Device in the GT to respond to PCs on that Midi Channel. Is there a way to make Songs in the GT (and also the LT) send those PC messages as soon as i select a preset in one of...

Yep Thanks Ron. The issue is with the Meris Enzo’s Arp mode that responds to Midi clock but doesn’t allow any subdivisions of the clock. Am i correct in thinking that if i am running Song Mode i could make all my non Enzo presets not use the Mid Clock Divide but just follow the Song...

Hi Ron Is there a way, via Sysex or with an external Midi event processor, to send Midi Clock Tempo divisions to only one device/on one Midi channel only?

Hi Ron I'm thinking about making a smaller version of my board that currently includes a GT-10, 2 x Mission expression pedals, 2 x G Lab wah pads both connected to the footswitch inputs of the GT, Livid Guitar Wing connected to a Kenton USB Midi Host and a Midi Merger box merging the GT's midi...