I am having trouble figuring out how to use one button to swap between two loops. Here is what I would like to do. I keep my compression on all the time and want to be able to add my overdrive on top of it and toggle back and forth between those two. I would like a second button that keeps my...
Hey guys I have two pedals that I like to experiment with their placement. Currently my compressor is setup on my PBC6X button 1 to engage the loop. But I would like to be able to then hold that same button and toggle the compressors placement from before my overdrives to after my overdrives...
Hey gang. Has anyone tried using the function jack on the PBC6X with a TRS splitter cable to send auto tap info to two pedals? I’m using a Strymon Volante and Mobius. For some reason using midi clock introduces clock noise into my rig that I can’t get rid of. The work around has been using auto...
Hey guys, I run a DD20 for my delay. I use the function switch to send BPM info to the DD20. Midi Clock on the PBC6X is off. I also use a Chase Bliss Gravitas tremolo. It is hooked up to a Midi Box 4 from Disaster Area. My question is this, is there a way to send the same BPM info Im sending to...
Hey guys I love ramping tremolo. I was wondering if its possible for the PBC6X to ramp the speed up and down on a mobius. I remember on my boss ES8 there was a wave that could act like an internal expression pedal. Is there something similar on the PBC? Anyway to achieve this?
Hey gang. Auto tap question here. Currently I’m tracing down an issue I’m having with midi clock interferance so for the time being I need to send autotap to my Volante for synced bpms.
How do I make sure the tempo information gets transmitted to the Volante when I load a song? I have the...
Thanks for the reply Ron. I tried 4 different TRS cables in each port. The issue seems present in El Guapo and Bloom with all 4 cables and all . The Golden Boy and Gravitas are fine. What else would you suggest trying? Im going to look at power next. They're all being powered individually from a...
Hey guys I’m getting a bad ticking when using my Jackson stuff. It seems related to midi. I’m running from the PBC6X into a disaster area midi box and then to the 3 Jackson’s and chase bliss using standard TRS cables. Everything is powered from a strymon zuma.
When I unplug midi the sound...
Finally finished up my new PBC-6X board. I went ahead and finally moved on from my George L patch cables and upgraded to soldered ones using the SP400 & 550S plugs and Mogami 2319 cable. Thanks to the PBC midi functionality along with the Jackson Audio drive pedals this is the most versatile...
I run a Volante, DD20 and Cusack tremolo on my board. I run midi clock to the volante and use FN switch 1 to the DD20 to control my BPMs. My question is this, can I also run tap tempo to my Cusack tremolo from the PBC/6X? The specs say there are two function switches. So I would assume that I...
When I'm using setlist mode I want to have the PBC/6X change the BPMs on my delay as soon as I press the bank up or down button.
I created 5 songs in the song section. Each song has a unique tempo. Then I created a setlist with those five songs. I'm using the bank up and down buttons to toggle...
Hey Ron. So I played around with the editor last night and figured out how to achieve a few things. But I'm still having trouble with recalling presets. Currently when I try to recall a preset I'm being taken to one of the IA pages (Dry pedals, Wet Pedals , MIDI control). I'll create and save a...
When I am building a preset I would like the PBC/6X to jump back to the currently selected preset once its done saving. How would I accomplish this. Currently I build a preset by cycling through a button page of dry effects, another button page for my wet effects, then I hold the IA/Store button...
Hey guys. I got my PBC/6X last week and I love it! But a few days ago I started having some problems with it. Has anyone experienced their PBC/6X just bug out? All of the sudden my screen has quit working and I cant select anything. Ive tried rebooting and reinstalling the firmware and editor...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.