Firmware and editor 4.9.0 are now available! (Now updated to 4.9.1, see below...)
FEATURES:
PLEASE DON'T DO A MAJOR FIRMWARE UPDATE RIGHT BEFORE YOUR BIG GIG!
- First, back up your settings to a flash drive or computer! If you go back to 4.7 or earlier, your Mastermind will factory reset.
- Download and unzip the firmware file.
- Copy the file to a USB flash drive, and remove any other .rjf files from the flash drive.
- Eject the drive from your computer.
- Power on the Mastermind while holding the 1 and 3 buttons.
- Keep holding until you see "Mastermind Bootloader" appear on the screen.
- Now plug the flash drive into your Mastermind. The update should begin and will take a few minutes to complete.
-OR-
- First, back up your settings to a flash drive or computer! If you go back to 4.7 or earlier, your Mastermind will factory reset.
- Download and unzip the firmware file.
- Use the editor's Transfer / Update Firmware menu option to update the Mastermind. This works with the PBC/6X and PBC/10s made after March 2019.
Firmware: https://www.rjmmusic.com/downloads/PBC/MM491.zip
Mac Editor: https://www.rjmmusic.com/downloads/PBC/MastermindEditor-4.9.1.dmg
PC Editor: https://www.rjmmusic.com/downloads/PBC/MastermindEditor-4.9.1.zip
PBC/6X Manual: https://www.rjmmusic.com/downloads/PBC6X/PBC6X Manual-4.3.pdf
PBC/10 Manual: https://www.rjmmusic.com/downloads/PBC/PBC Manual-4.2.pdf
FEATURES:
- New device support:
- Red Panda Bitmap 2 and Raster 2
- Strymon V2 pedals: Bluesky, Deco, Dig, El Capistan, Flint, Lex
- Wampler Metaverse
- Fixed the Off Preset LED color option, which didn't quite work in 4.8.1
- Added Dynamic Distortion block support in Axe-Fx III
- Fixed an editor bug in the PC messages section that can cause PCs to be sent when they aren't supposed to
- A proposed fix to a problem that caused the editor to hang during settings transfers on Macs. Let's hope this works!
- Fixed the inability to select a few Axe-Fx III CCs at the end of the CC list
- Fix bug that prevented Song action from updating preset button names
PLEASE DON'T DO A MAJOR FIRMWARE UPDATE RIGHT BEFORE YOUR BIG GIG!
- First, back up your settings to a flash drive or computer! If you go back to 4.7 or earlier, your Mastermind will factory reset.
- Download and unzip the firmware file.
- Copy the file to a USB flash drive, and remove any other .rjf files from the flash drive.
- Eject the drive from your computer.
- Power on the Mastermind while holding the 1 and 3 buttons.
- Keep holding until you see "Mastermind Bootloader" appear on the screen.
- Now plug the flash drive into your Mastermind. The update should begin and will take a few minutes to complete.
-OR-
- First, back up your settings to a flash drive or computer! If you go back to 4.7 or earlier, your Mastermind will factory reset.
- Download and unzip the firmware file.
- Use the editor's Transfer / Update Firmware menu option to update the Mastermind. This works with the PBC/6X and PBC/10s made after March 2019.
Firmware: https://www.rjmmusic.com/downloads/PBC/MM491.zip
Mac Editor: https://www.rjmmusic.com/downloads/PBC/MastermindEditor-4.9.1.dmg
PC Editor: https://www.rjmmusic.com/downloads/PBC/MastermindEditor-4.9.1.zip
PBC/6X Manual: https://www.rjmmusic.com/downloads/PBC6X/PBC6X Manual-4.3.pdf
PBC/10 Manual: https://www.rjmmusic.com/downloads/PBC/PBC Manual-4.2.pdf
Last edited: