jjtguitar
Well-Known Member
I'm having some weird issues getting trails working between presets on my PBC10.
Loops 7-10 are all parallel, and from looking at another thread on this topic (https://www.rjmmusic.com/forum/index.php?threads/no-trails-when-set-to-parallel.1851/) I have double checked loops are parallel (they are), and no redundant PC messages are being sent (they aren't in my test presets).
I have a Strymon BigSky in Loop 7, Eventide H9 in Loop 8, Free the Tone Future Factory delay in Loop 9 and Neunaber Illumine in Loop 10. All stereo in/out, all controlled by MIDI.
This is how I'm testing. I have two presets. "Big Wash" and "Dry".
"Big Wash" has drive pedals in Loops 3 and 4 on, plus I have been testing Loops 7-10 one at a time. MIDI PC messages are sent to all pedals to select presets.
"Dry" turns all active loops off, and turns on Loop 6. No PC messages are transmitted on this preset, so no MIDI pedals are doing any changes when I go between Big Wash and Dry.
So I choose a big washy traily preset on each pedal, strum away, stop strumming, then switch to the dry preset. I have done this individually for each of Loop 7-10.
Loops 9 and 10 seem to be working properly with trails. However when I test a huge washy preset on the BigSky or H9, get some good trails going, then change to a Dry preset, the trails are cut off. This happens with just Loop 7, and just Loop 8.
Not sure what I'm doing wrong, or what I'm missing. Would love some insight into where the issue is.
Loops 7-10 are all parallel, and from looking at another thread on this topic (https://www.rjmmusic.com/forum/index.php?threads/no-trails-when-set-to-parallel.1851/) I have double checked loops are parallel (they are), and no redundant PC messages are being sent (they aren't in my test presets).
I have a Strymon BigSky in Loop 7, Eventide H9 in Loop 8, Free the Tone Future Factory delay in Loop 9 and Neunaber Illumine in Loop 10. All stereo in/out, all controlled by MIDI.
This is how I'm testing. I have two presets. "Big Wash" and "Dry".
"Big Wash" has drive pedals in Loops 3 and 4 on, plus I have been testing Loops 7-10 one at a time. MIDI PC messages are sent to all pedals to select presets.
"Dry" turns all active loops off, and turns on Loop 6. No PC messages are transmitted on this preset, so no MIDI pedals are doing any changes when I go between Big Wash and Dry.
So I choose a big washy traily preset on each pedal, strum away, stop strumming, then switch to the dry preset. I have done this individually for each of Loop 7-10.
Loops 9 and 10 seem to be working properly with trails. However when I test a huge washy preset on the BigSky or H9, get some good trails going, then change to a Dry preset, the trails are cut off. This happens with just Loop 7, and just Loop 8.
Not sure what I'm doing wrong, or what I'm missing. Would love some insight into where the issue is.