I have mini effects gizmo and mini line mixer. I believe they are connected properly to my amp effects loop (series). I have various delay and reverb (just mono) between the mixer (using right only connections) and gizmo and Kill dry is on each pedal. I am still getting alot of dry signal with...
Not working at all. Have all 3 strymons with midicl on and none of them are doing anything. Also there is no light for the button I set up to do this. LT is changing presets and bypassing pedals though.
Hey all - sorry if this is a dumb question....
Just looking to create a tap tempo button using Midi Clock on LT to send tempo to strymon pedals. Most of my strymon presets have set tempos and want to keep that but on the fly just want a button to change the tempo if I am messing around.....and...
Hello. Expecting my switchblade tomorrow and basically using only 2 routing scenarios with it- 1 with my Mobius in amp effects loop and 1 with it in front of amp. This means there are 2 switchblade presets. Switchblade will also receive cc messages for each LT preset to have certain loops...
I'm using an an action for an axess electronics switcher for Cc0 to do nothing. Just did it to link the buttons I wanted. It all worked....except the button lights alternate between off and on when I switch Mobius presets even though Mobius is on.
I thought that may be case for returning to...
Hi. My effects page is set up to turn off various effects on/off - 1 button is for Mobius. When I hold that button, it takes me to the Mobius "favorites" page. This is set to change to various Strymon Mobius presets. On the favorites page, I don't really see the point for me to turn Mobius...
Button actions is where I had the issue but I was getting to higher # presets using PC Message section of Preset tab (I did have MSB on). Your explanation makes sense. I just copied the presets within the 1-127 range to make it easier --- but I will remember bank select message in case I ever...
I think that was issue....I saw that max program change on Device tab is 127. I just copied the preset to a # within that range and worked. I noticed that I have other program changes using higher #s on other Strymon devices as well but haven't experienced an issue...although I don't have...
Hi. I have a page setup to change to favorite presets on Strymon Mobius. When I change any RJM preset, it will change to a specified Mobius preset. Then I can navigate to a page and switch between some favorite Mobius presets. I noticed on a couple of RJM presets that it is not changing to...
Hi -- I have a page set up to turn off and on various effects via CC message. When I am on my amp lead channel, there is no way I'd ever want to turn on my fuzz pedal as it would be unpleasant for all involved. Anyway I can disable option to turn it on for certain presets???
Hi - according to Strymon, strymon preset will not reload when program change for the identical preset is already on is received. Don't know if that is a common thing but seems like it shouldn't work that way....
hi - I am not familiar with groups but all buttons are set to "none" for groups. I wasn't aware that IA action could by system/preset so that helped and I was able to switch to the new presets I created. I also had to mess with bank settings as a result but that seemed to work out. However...
Hi......My setup is a Diezel midi amp and various midi pedals. The amp does not respond to specific Midi program #s or CC - it has a learn mode where amp remembers which channel is for each Mastermind preset. My approach to setting up the LT is basically centered around that limitation. I...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.