Here's the long awaited 4.1 beta for the Mastermind GT!
FEATURES
PLEASE DON'T DO A MAJOR FIRMWARE UPDATE RIGHT BEFORE YOUR BIG GIG!
THIS IS BETA FIRMWARE AND WILL LIKELY HAVE BUGS!
- First, back up your settings to a flash drive or computer! If you go back to 3.1 or earlier, your GT will factory reset.
- Download and unzip the firmware file.
- Copy the file to a USB flash drive, and remove any other .rjf files from the flash drive.
- Eject the drive from your computer.
- Power on the Mastermind GT while holding the 1 and 3 buttons.
- Keep holding until you see "Mastermind GT Bootloader" appear on the screen.
- Now plug the flash drive into your GT. The update should begin and will take a few minutes to complete.
Firmware: http://www.rjmmusic.com/downloads/MMGT/Beta/MMGT41B1.zip
Mac Editor: http://www.rjmmusic.com/downloads/MMGT/Beta/MMGTEditor-4.1b1.dmg
PC Editor: http://www.rjmmusic.com/downloads/MMGT/Beta/MMGTEditor-4.1b1.zip
Manual: http://www.rjmmusic.com/downloads/MMGT/Mastermind GT Manual-4.0.pdf
Editor Manual: http://www.rjmmusic.com/wiki
I did a quick video overview, which you can find here:
FEATURES
- Axe-Fx III support!!!
- New button options for hold functions: "IA Mode Only" makes the hold function only work when IA mode is active. It will also only be displayed when IA Mode is active. "Show Name" allows to you turn on or off the display of the hold function's name in the button display.
- Preliminary support for volume pedals (log taper correction)
- Support for Ramble FX Kismet pedal
- Editor now has "Show Tool Tips" option so you can turn them off when they start annoying you
- A couple of bug fixes that I can't remember right now.
- Looper Once doesn't update the state of the buttons when the loop ends
- Sometimes, the Channel label disappears from an IA button
PLEASE DON'T DO A MAJOR FIRMWARE UPDATE RIGHT BEFORE YOUR BIG GIG!
THIS IS BETA FIRMWARE AND WILL LIKELY HAVE BUGS!
- First, back up your settings to a flash drive or computer! If you go back to 3.1 or earlier, your GT will factory reset.
- Download and unzip the firmware file.
- Copy the file to a USB flash drive, and remove any other .rjf files from the flash drive.
- Eject the drive from your computer.
- Power on the Mastermind GT while holding the 1 and 3 buttons.
- Keep holding until you see "Mastermind GT Bootloader" appear on the screen.
- Now plug the flash drive into your GT. The update should begin and will take a few minutes to complete.
Firmware: http://www.rjmmusic.com/downloads/MMGT/Beta/MMGT41B1.zip
Mac Editor: http://www.rjmmusic.com/downloads/MMGT/Beta/MMGTEditor-4.1b1.dmg
PC Editor: http://www.rjmmusic.com/downloads/MMGT/Beta/MMGTEditor-4.1b1.zip
Manual: http://www.rjmmusic.com/downloads/MMGT/Mastermind GT Manual-4.0.pdf
Editor Manual: http://www.rjmmusic.com/wiki
I did a quick video overview, which you can find here:
Last edited: