The default is 32 presets, which is correct.
On bottom Send PCs and Send redundant PCs is default checked.
Send CC on preset change is not checked.
The Synesthesia and RJM don't seem to be working correctly together. I set the presets to change in RJM editor. Write changes to device, but the...
Thank you. Question, setting up synesthesia under devices. What boxes should be checked on bottom? I have send PCs and send PC on preset change checked ? Wasn't sure about the redundant box? Max presets I believe is 32. I checked PC offset 1 also. Thanks
I was able to get it figured out. Henry helped me from GFI. I think one of the problems I may have been having is I have the Collider also set up with pedal expression. If I have one preset, I think I can only use one of those effects at a time since they are on the same expression pedal. I shut...
Just wondering how I would set up Synesthesia GFI parameters to be controlled with my expression pedal. I have the expression pedal set up in PBC 6X. It works on my Collider. I have the Synesthesia set up for PC. I put CC 42 on the Synesthesia Expression pedal set up. When I use the expression...
Trying to update to 4.5.0. I'm using the transfer/update. I get an error saying: error validating: file block to long. Not sure what to do from there? Also, should you update both firmware and editor? Any order on doing so better?
I just got a new Source Audio EQ2 pedal and placed it first in my chain. My guitar plugs directly into it. It’s extremely noisy, mostly when not playing. I replaced my boss tu2 tuner with this pedal. Much more noise. Would this have anything to do with the way I have buffering set up in my PBC...
Just trying to figure out why I can’t get past 8 songs in songlist mode. I’ve got the first 8 songs working with presets for each song, but when I try to go to song 9 with the bank up button, it won’t advance any further up? of note, I’m using an external bank up and down button- RMT by Goodwood...
I have made some progress and at least have it doing PCs. Question: There is a feature in the Presets of Synesthesia called Auto Stompbox Mode. So basically it puts the pedal in stomp box mode when you engage that preset and you have 2 separate engines to choose from. SO it gives you 2 presets...
Anyone set this pedal up with PBC? I just got one today and I’m putting it on the board later. Just looking for some pointers and guidance as I’m still pretty green when it comes to midi and the controller. I’ll be putting it on midi channel 3 and really just using it for PCs and simple...
Anything special about setting up the Eventide H9 with the 6X for preset changes? I've ordered one and just trying to get a jump on getting it set up. It will be midi device #3. Still new to midi, but slowly learning.I'll be running it with my Collider coming out of midi thru on collider to midi...
I have my main page set up on editor for Loops on and off (dry, wet, midi) and tap tempo. I want to start putting my setlist, songs and using my presets in the editor. For gig functionality of this, do I need to create a new page in editor?
I have a separate switch that controls my bank up and...
How do you recommend using the iridium with the 6X and using an amp in live setting? I have the iridium in one of my loops. Would I have to disable the cabinet feature in the iridium? Would you run it last in the loop order? I mainly have it on my board also as a backup for my tube amp just in...
I’ve now been able to get the collider working better with the 6x with the help of source Audio and RJM. I’m using Master midi clock for tempo control and using expression cc100 to control collider parameters with the neuro editor. They both seem to be working well now. For some reason, my midi...
Update on collider. It’s sounding like the collider is not working well with the RJM. Probably not able to handle multiple pc/cc commands. It works fine for preset changes, but when I try to do a CC #93 for tap tempo and CC#100 for expression pedal from RJM it just stops working with midi. I can...
I’m also wanting to do this with my 6x. So would I just need the chase bliss midi box and would I need a certain cable for the iridium? I have a collider and terraform connected midi now.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.